Layered V-Neck Tutorial from mahlicadesigns

I ran across a picture of a v-neck tee a while back that had a double layered neck band and added it to my collection of interesting clothing details to try someday. Unlike most things in my little collection, I did spend some time working this one out using the Tabor V-neck pattern and I’ve put together a tutorial to share with you.

For my layered V-neck I used oatmeal Baby French Terry from Simply By Ti. The baby french terry is light enough to drape nicely in the Tabor and there’s barely any bulk in the double layered neckband. When choosing fabric for your project, experiment by folding layers together to see if you like how they look.

I’m really happy with the overall look I achieved with the layered neckband and this color has been a very useful addition to my wardrobe. If I were to do it again though, I might not use the Tabor pattern combined with this technique. The V on the Tabor is pretty deep and using a narrower band than the pattern calls for at the center front makes me feel a little exposed.

Maybe, but probably not, I’ll put on the wider band that the Tabor calls for (because I love this top) and make another layered V-neck using another pattern.

Layered V-Neck Tutorial

The measurements provided are based on the Tabor V-neck size 8. As a guideline, the outerband should come down and cover approximately 2/3 the length of the front of your v-neck, shoulder to center front. My innerband starts at the shoulder and goes to center front. You can also cut the inner band to fit the entire neckband if you are not concerned about bulk.
You can adapt the technique to your favorite V-neck tee pattern, but you’ll need to adjust the band lengths I’ve given to fit.

Cut your custom bands:

Innerband cut 2:   2.25in X 14in    (3/4in finished width)

Outerband cut 1:   3in X 25in    (1 1/8in finished width)

Interface the center V on the bodice of your tee and sew the front and back together at the shoulders.

Apply fusible web along the short ends of the outerband piece. Fold back the short ends wrong sides together by 1/2in and press to secure with the fusible web.

Mark the center (center back) and mark the shoulder seams 5in away from center back on the outerband.

Sew the innerband pieces together forming a V at center front. Using a 3/8in seam allowance, insert and baste the innerband into place along the V. Don’t baste the entire length of the inner bands, just a few inches around the center V.

Starting at center back, leaving the outerband unfolded, pin the single layer of the outerband in place along the neckline. Stretch the outerband slightly as you pin in place from center back to the shoulder seam. The bands don’t need to be eased in from shoulder to center front.

Next, pin the innerband in place along the bottom portion of the neckline up to the shoulder seam. The innerband should overlap the single layer of the outerband.  Trim away any excess length of the inner band that extends past the shoulder seam.

Lastly, fold over the outerband, sandwiching the innerband within and repin all layers as needed along the entire neckline. Remember the outerband is eased slightly between the shoulders and center back.

If you want to check your proportions first, baste the entire neck band into place (innerband and outerband now functioning as one unit) using a 3/8in seam allowance.

Sew/serge your layered neckband into place using 3/8in seam allowance. Complete the construction of your tee per the pattern instructions.

As always, thanks for reading today.

You can follow me on instagram, Bloglovin, or by entering your email in the right side bar.

You might also like: Tabor V-Neck and Lander shorts

Save For Later

Pin this image, so you can come back when you’re ready to start sewing your version.

One thought on “Layered V-Neck Tutorial from mahlicadesigns

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.